Account
Cart

8 Steps for How to Change A Pool Light?

how to change a pool light

This post will tell you how to change a pool light. Swimming pools are a great way to cool off and relax during the summer months, but they can also be a source of frustration when something goes wrong. One of the most common issues that pool owners face is a burned-out pool light. If you’re experiencing this issue, don’t worry – changing a pool light is a relatively simple task that can be accomplished with a few basic tools and a bit of knowledge. In this blog post, we’ll walk you through the process of changing a pool light, so you can get back to enjoying your pool in no time.

Before we get started, it’s important to note that different types of pool lights will have different instructions for replacement, so it’s always a good idea to consult the manufacturer’s instructions for your specific light. Additionally, it’s important to use the same type of light bulb that was originally installed in the fixture.

led pool lights

Step for how to change a pool light

Step 1: Turn off the power to the pool light circuit

The first step in changing a pool light is to turn off the power to the light circuit. This is usually done by turning off the breaker or removing the fuse that controls the light. It’s important to make sure that the power is off before you begin working on the light to avoid the risk of electrocution.

Step 2: Locate the light fixture

The next step is to locate the light fixture in the pool. It may be in a niche or on the side of the pool. The fixture will typically have a lens cover that will need to be removed in order to access the light bulb.

above ground pool lights IP68 waterproof rgb led underwater swimming pool light 12V

Step 3: Remove the lens cover

To remove the lens cover, twist it counterclockwise or release the clip that holds it in place. Be careful not to damage the cover as you remove it.

Step 4: Remove the light bulb

Once the lens cover is removed, you will be able to access the light bulb. To remove the bulb, twist it counterclockwise. Be sure to handle the bulb carefully to avoid breaking it.

above ground pool lights IP68 waterproof rgb led underwater swimming pool light 12V

Step 5: Replace the light bulb

With the old bulb removed, it’s time to replace it with a new one. Be sure to use a light bulb of the same type and wattage as the original. It’s also important to note that some pool lights may require a special type of bulb, so be sure to check the manufacturer’s instructions before purchasing a replacement.

Step 6: Replace the lens cover

Once the new light bulb is in place, replace the lens cover and secure it in place. Make sure that the cover is properly sealed to prevent water from entering the fixture.

Step 7: Turn the power back on

With the light bulb replaced and the lens cover secured, it’s time to turn the power back on to the pool light circuit. Be sure to turn the breaker or replace the fuse that you removed earlier.

Step 8: Test the light

Finally, test the light to ensure it is working properly. If the light doesn’t turn on, double-check to make sure that the power is on and that the bulb is properly seated in the fixture. If the light still doesn’t turn on, you may need to call a professional to diagnose the issue.

Changing a pool light is a relatively simple task that can be accomplished with a few basic tools and a bit of knowledge. By following the steps outlined in this blog post, you’ll be able to change a pool light and get back to enjoying your pool in no time. Remember to always consult the manufacturer’s instructions for your specific light, and use the same type of light bulb that was originally installed in the fixture.

In conclusion, how to change a pool light is an easy task that can be done.

5/5 - (1 vote)

Leave a Comment

Large Quote Request