Above Ground Pool Lights IP68 Waterproof RGB Led Underwater Swimming Pool Light 12V
- Brand: AUCCE
- Manufacturer: OPPNO Lighting
- Size: φ295*H70mm
- CCT: White/Warm white/RGB
- Voltage: AC 12v
- CRI > 90
- Wattage: 12W
- Lumens: 1400lm
- Certificate: CE/RoHS/UL/FCC
- Warranty: 3 years
Above Ground Pool Lights Describe
Pool Lights Features:
The led above ground pool lights must be installed on a flat surface of the pool. Place the mounting plate on the concrete wall and tighten it with 4 screws. The conduit must be put next to the mounting plate.
Reserve at least 150mm of cable to coll around the back of the light. This 150mm of cable allows the pool light to be serviced after the pool is filled with water.
Feed cable through the conduit to the junction box or low voltage transformer.
The top sign on the light should be lined up with 12 o’clock position. If there’s not a top sign, the screw hold on the face ring of the light should be lined up with 12 o’clock position. Hang the light onto the mounting plate and tighten the pilot screw.
Pool Lights Installation
Please calculate the transformer watts according to the number of lamps.
If you need to play 20pcs light for the same steps, please calculate as 7.5w*20pcs*1.3=195w. You need 200-250W AC transformer for fitting it.
Working in 12V AC.
The transformer and RF controller should be controlled in 10m distance from lamps. If distance is far away from lights, you need to add a power supply and RF controller watts.
Q & A
An LED (light-emitting diode) is a semiconductor device that emits light when electricity passes through it. LEDs are commonly used in many household appliances, traffic signals, and even flashlights.
Incandescent bulbs have been around since the early 1900’s. However, their efficiency was only about 20%, meaning that 80% of the power was wasted as heat. In comparison, LED lights are much more efficient. A typical LED bulb uses less than 10 watts of power, while incandescent bulbs use 100 watts or more.
The basic principle behind how an LED works is simple. An electric current flows through a wire filament inside the bulb. When electrons hit the filament, they release photons of light. By changing the color of the light emitted, different colors can be produced.
What are some advantages of using LED lights?
There are several reasons why people choose to use LED lights over traditional incandescent bulbs. First, they last longer. Incandescent bulbs burn out after approximately 1,000 hours, whereas LED bulbs can last up to 50,000 hours. Second, they consume less energy. Traditional bulbs require 100 watts of power, while LED bulbs need only 10 watts. Third, they cost less. Because they don’t use nearly as much energy, LED bulbs cost significantly less than traditional bulbs. Fourth, they’re safer. Unlike traditional bulbs, LED bulbs cannot explode or catch fire. Finally, they emit less heat. Because they generate less heat, LED bulbs won’t get hot enough to cause burns if touched.
Where can I buy LED lights?
You can find LED lights at any lighting store. If you want to purchase online, OPPNO Lighting will be your best choice. You’ll want to look for ones that are rated at least CRI 95. These ratings indicate how well the light produces white light. If the rating is lower, then the light may not produce the right amount of blue light.
Paypal | Credit Card | Bank Transfer | Western Union.
We will send out your led lights within 6 days after you arrange the payment.
Free Shipping, Ship by DHL/UPS/FedEx.